Multifunction I/O


  • Max. current 8A at 250Vac
  • Possibility of configuring the signal-to-contact associations
  • Pass-through serial link for PC connection

Multifunction I/O Serial Link/Contacts Duplexer

Multifunction I/O is an accessory through which you can monitor battery operation, by-pass, alarm and battery discharged status reports with dry contacts (maximum current 8A/250V). The accessory also has an input which is used to set up the configurable remote on, remote off and remote on/off functions through the UPSTools software (vers. 1.3.3 or higher).

These functions are provided for UPS with firmware versions SWM020-01-16 or higher.